Kilcox Extra Disinfectant

For best results, it is recommended that all gross soiling is removed and that all surfaces should be thoroughly cleaned with a premium Kilco foaming detergent product and rinsed with clean water prior to the application of Kilcox Extra.
FOR STANDARD TERMINAL DISINFECTION PURPOSES: use at a dilution of 1 – 2% v/v.
FOR SPECIFIC COCCIDIAL / CRYPTOSPORIDIAL CHALLENGE: use at a recommended dilution of 2-4% v/v, depending on the severity of the challenge
and/or the environmental conditions. The disinfectant should be left in contact for a minimum of 2-4 hours, prior to rinsing with clean, fresh water. Apply dilution via spray or foam at 0.3L per square metre to cover all surfaces in the building and all equipment, as appropriate.
FOOT DIP BATHS: 1-2% v/v dependent on frequency of use and organic challenge.
THERMAL FOG: 10 – 30% v/v, apply 1 to 1.5 litres per 1000 square feet of floor area. Department of Agriculture, Food & the Marine Approved Disinfectant